If you own a pressure washer, you have probably heard of the product called the fat pump. These pumps have become quite popular over the last few years because instead of using a standard garden hose, they attach to your pressure washer to provide an extra water source. There are many benefits to these pressure washers, however, before you decide to purchase one of these devices, it is important to be fully educated about what they are and how they work. This article will give you all the information you will need on this wonderful and helpful product.
A fat pump is a diaphragm attached to the top of a water-powered pump that can draw in water from any distance. The pump acts as a vacuum, drawing the water into the diaphragm. This provides a powerful force that can remove hard water stains, mud and grease. These pumps are very handy to have because you can simply use them when and where you need them the most.
There are two ways that a pressure washer works. The first way is known as the concentric pressure method and uses a smaller suction tube than the second type. This is best used for small jobs around the house. The larger suction tubes are used when using the concentric pressure method. These types of devices can literally draw up to a gallon of water at a time.
Many people consider the tankless pressure washer to be the best pressure washing device on the market today. When the motor of the pump runs, it draws power from the electrical current from the wall socket and converts it to electricity. This makes it very reliable and safe to use around children and pets. If you happen to have a dead battery, the device will still run but you will have to manually start it up again.
You will find that this kind of electric washer for hot water is also quite compact. While it is very efficient, it does not take up too much space. In fact, it can fit on a counter top or even a table. You do not have to worry about taking it with you in your car because they both have a small footprint. They can easily be folded when not in use.
Both types of pump will take a few hours to properly heat up the water in your home. Once the pump heats up the water, it will pull it through the hose and into your hot water system. This is where it is separated from any other water in your home. The electric pressure washer will usually provide enough water for a large family. This can work out to be about 2,500 gallons of hot water at a time.
The pump has an impeller on the bottom that forces the water through the pump by creating pressure. This is very similar to how a garden hose works. You should be able to easily see how the electric motor creates the pressure to pull the water through your home.
One of the advantages of using an electric pressure washer over a pressure washer that uses hot water is the noise factor. An electric motor is much quieter than a hot water engine and therefore you will not be bothered by the noisy machine as you would with a hot engine. The only thing that you will notice is that the noise from the electric motor is not as loud as that from a gasoline engine. However, this will not be a huge problem for most people. If you are concerned about noise, you may want to look into purchasing a model that uses gasoline instead of electricity.